Read more »
Russian/English registered and portable versions in one installer!
R-Studio is currently the best data recovery software for deleted and damaged data. Supports FAT12/16/32, NTFS, NTFS5, Ext2FS (Linux) file systems. Allows you to recover files both on local logical and physical hard drives, and on drives located on remote computers via a computer network.
Recovery is possible even in cases where disk partitions were damaged or deleted, as well as in cases where the disk was formatted, the FDISK command was used, the MBR was damaged, data was lost as a result of a virus attack. It is possible to create a disk image for further data recovery. Recreates a damaged RAID. Ability to recover encrypted files, compressed files and alternative data streams. The file or disk content can be displayed and edited in a hex editor that supports editing the NTFS file tag. R-Studio was created thanks to new unique technologies. The flexibility of parameter settings gives you full control over the data recovery process.
Program features:
- Standard user interface "Windows Explorer"
Data recovery over the network - Supported file systems: FAT12, FAT16, FAT32, NTFS, NTFS5, HFS/HFS+, Little and Big Endian variants of UFS1/UFS2 and Ext2FS/Ext3FS
- Recognition and analysis of Dynamic, Basic and BSD (UNIX) partition schemes, as well as Apple partition scheme
- Support for dynamic partitions on GPT as well as MBR
- Reconstruction of damaged disk arrays (RAID)
- Creating an IMAGE FILE for an entire Physical Disk (HD), Partition or part of it
- Data recovery from damaged or deleted partitions, encrypted files (NTFS5), alternative data streams (NTFS, NTFS5)
- Restoring data after running FDISK or similar utilities
- Data recovery after a virus attack; FAT corruption; MBR destruction
- Localized Name Recognition
- Recovered files can be saved to any drive, including a network drive, accessible by the local operating system
- Files or disk contents can be viewed and edited using the built-in hex editor
R-Studio recovers files:
• Deleted outside the Recycle Bin or when the Recycle Bin has been emptied
• Deleted by a virus attack or computer power failure
• After a partition with files has been reformatted, even to a partition with a different file system
• When the structure of a partition on a hard disk has been changed or damaged
• From hard drives that have a large number of bad sectors
RePack's features:
Type: installation | unpacking.
Languages: Russian | English (Russian by default).
Removed: help (except for Russian and English), EULA, other localizations.
Activation: completed.
Type: installation | unpacking.
Languages: Russian | English (Russian by default).
Removed: help (except for Russian and English), EULA, other localizations.
Activation: completed.
Command line switches:
• Silent installation of the Russian version: /S / I
• Silent unpacking of the portable version: /S /P
• It is also possible to select a directory for installation: After all the switches, add /D=%path% Example: installation_file.exe /S /I /D=C:\ R-Studio
Изменения в версии:
New features:
+ Several disk objects can be opened in one tab. All these objects can be simultaneously searched for files, their files can be marked and recovered.
+ Drive imaging can be interrupted and then resumed. When the user stops an imaging process, they have two options: to discard an already created partial image file or to save it to resume drive imaging later. Created partial images can be loaded, too.
+ Some extended options have been added to the drive operation progress windows. They can be altered on-the-fly.
+ File types can be searched for on the Known File Types dialog box.
R-Studio Technician:
+ A new license type T80+. R-Studio T80+ is equal in its features to full-fledged R-Studio Technician, runs for a certain period of time, and during its validity period can be upgraded to R-Studio Technician for the initial price difference. The license price of 1 USD per day is very affordable for small businesses, computer repair shops, and individual data recovery contractors.
+ R-Studio Technician is now available on our public web pages and can be tested in the Demo mode.
+ Native support for data recovery hardware from DeepSpar: USB Stabilizer and RapidSpar. Such support allows the user of R-Studio to control hardware parameters directly from the R-Studio interface and create drive's sector maps to improve multiple data recovery operations.
+ Runtime imaging. R-Studio creates drive images in parallel with other drive reading operations. Next time when R-Studio accesses data from imaged drive areas it gets the data from the runtime image.
+ Multi-pass imaging. Images from problematic drives can be created through several phases reading data from good areas first and from bad and slow areas later. Such approach allows for extracting maximum possible amount of data even from quite faulty drives.
+ Support for sector maps, both in the R-Studio's format and in the third-party software ddrescue and HDDSuperClone formats.
+ I/O Monitor allows the user to inspect read/write operations in real time.
Improvements:
* Support for macOS file vault has been improved.
* Symlink processing has been improved, including the Mark all and Unmark all commands.
* Execution of the Save All File Names / Load File Names commands has been accelerated.
* File type icons have been added to the Find Results (Find All Files) panel.
* Message display in the Log View panels has been improved.
* Recheck Recovery Chances has been improved.
* A warning message appears when the user tries to close tabs with open disks/partitions.
* The recovered part of a file will remain when the recovery process has been interrupted.
Bugfixes:
- R-Studio may freeze when opening a RAID created from disk images. Fixed.
- The Logical Sector Size parameters may have appeared twice on the IDE Properties tab. Fixed.
- R-Studio may have frozen when creating an image of a recognized partition. Fixed.
- Files didn't appear in the Find Results panel after they were unmasked if file sorting tabs were switched.
- R-Studio may not have found a file by its exact size. Fixed.
- FAT cross-linked folders may have been processed incorrectly. Fixed.
- Zero-sized files could be viewed in the built-in Text/Hexadecimal Editor and file previewer. Fixed.
- The FAT32 bitlocker to go couldn't be recognized. Fixed.
- A disk letter for a bitlocker volume didn't change when the disk letter for its partition was changed. Fixed.
- An image file from a remote computer could not be saved to either the remote computer or local one. Fixed.
New features:
+ Several disk objects can be opened in one tab. All these objects can be simultaneously searched for files, their files can be marked and recovered.
+ Drive imaging can be interrupted and then resumed. When the user stops an imaging process, they have two options: to discard an already created partial image file or to save it to resume drive imaging later. Created partial images can be loaded, too.
+ Some extended options have been added to the drive operation progress windows. They can be altered on-the-fly.
+ File types can be searched for on the Known File Types dialog box.
R-Studio Technician:
+ A new license type T80+. R-Studio T80+ is equal in its features to full-fledged R-Studio Technician, runs for a certain period of time, and during its validity period can be upgraded to R-Studio Technician for the initial price difference. The license price of 1 USD per day is very affordable for small businesses, computer repair shops, and individual data recovery contractors.
+ R-Studio Technician is now available on our public web pages and can be tested in the Demo mode.
+ Native support for data recovery hardware from DeepSpar: USB Stabilizer and RapidSpar. Such support allows the user of R-Studio to control hardware parameters directly from the R-Studio interface and create drive's sector maps to improve multiple data recovery operations.
+ Runtime imaging. R-Studio creates drive images in parallel with other drive reading operations. Next time when R-Studio accesses data from imaged drive areas it gets the data from the runtime image.
+ Multi-pass imaging. Images from problematic drives can be created through several phases reading data from good areas first and from bad and slow areas later. Such approach allows for extracting maximum possible amount of data even from quite faulty drives.
+ Support for sector maps, both in the R-Studio's format and in the third-party software ddrescue and HDDSuperClone formats.
+ I/O Monitor allows the user to inspect read/write operations in real time.
Improvements:
* Support for macOS file vault has been improved.
* Symlink processing has been improved, including the Mark all and Unmark all commands.
* Execution of the Save All File Names / Load File Names commands has been accelerated.
* File type icons have been added to the Find Results (Find All Files) panel.
* Message display in the Log View panels has been improved.
* Recheck Recovery Chances has been improved.
* A warning message appears when the user tries to close tabs with open disks/partitions.
* The recovered part of a file will remain when the recovery process has been interrupted.
Bugfixes:
- R-Studio may freeze when opening a RAID created from disk images. Fixed.
- The Logical Sector Size parameters may have appeared twice on the IDE Properties tab. Fixed.
- R-Studio may have frozen when creating an image of a recognized partition. Fixed.
- Files didn't appear in the Find Results panel after they were unmasked if file sorting tabs were switched.
- R-Studio may not have found a file by its exact size. Fixed.
- FAT cross-linked folders may have been processed incorrectly. Fixed.
- Zero-sized files could be viewed in the built-in Text/Hexadecimal Editor and file previewer. Fixed.
- The FAT32 bitlocker to go couldn't be recognized. Fixed.
- A disk letter for a bitlocker volume didn't change when the disk letter for its partition was changed. Fixed.
- An image file from a remote computer could not be saved to either the remote computer or local one. Fixed.
OS: Windows 2000, XP, 2003 Server, 2012 Server, Vista, 2008 Server, 7, 8, 8.1, 10 Download R-Studio 9.0 Build 190296 Technician (58.35 MB):
0 Reviews